VViViD Dark Black Headlight Taillight Tint Air-Release Vinyl Wrap Film Roll (1.49ft x 60")

Price: $12.99
Product prices and availability are accurate as of 2019-07-18 12:48:06 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

WARNING: These films are made for headlights and tailights that would normally be impossible to wrap. These tints have air release and are applied with heat to conform to desired shape. It may leave a subtle orange peel that is not normally visible from a short distance. All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!

Product Features

VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box! This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape. This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple! Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights. NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 1.49ft x 60"